Forza Motorsport's Touge Community
 
HomeFAQSearchMemberlistRegisterLog in

Share | 
 

 Picked up a new project :]

View previous topic View next topic Go down 
Go to page : Previous  1, 2, 3
AuthorMessage
lBrawnyemperoRl
Touge Elite


Posts : 2970
Join date : 2013-01-16

PostSubject: Re: Picked up a new project :]   Sat May 31, 2014 3:13 pm

okay then i was mistaken it Wink
Back to top Go down
View user profile
King914
Touge Enthusiast
avatar

Posts : 608
Join date : 2013-02-07
Age : 28
Location : NEW YARKKK

PostSubject: Re: Picked up a new project :]   Sun Jun 15, 2014 8:50 am

OMG im late to the party HACHI ROKU!!!!!!!! yess yess and yess this build should be LUVDATSHITTTTT

_
B-CLASS EG6 4:35:869 CLEAN NDH.  A-CLASS LANEVO6 4:40:000 NUH
B-CLASS EG6 3:46.290 DIRTY ODH
                            Mild Built RB25 S13
                            BUILT NOT BOUGHT king
Back to top Go down
View user profile
Koolaid
Touge Veteran
avatar

Posts : 1721
Join date : 2012-12-08
Age : 27
Location : Virginia Beach, VA

PostSubject: Re: Picked up a new project :]   Sun Aug 31, 2014 12:39 am

Welp I've got good and bad news
The bad news is that the 20v is going to have to wait since I gave up the $1800 i saved up for my mothers second flight ticket to the philippines due to my grandmothers health.
The good news is that i picked up a 16v for free, my friends friend was about to junk his aw11 16v since he had no use for it and needed to clean up his shop.
I should also be picking up a set of sw20 seats and rails this coming tuesday.




_
Back to top Go down
View user profile
lBrawnyemperoRl
Touge Elite


Posts : 2970
Join date : 2013-01-16

PostSubject: Re: Picked up a new project :]   Sun Aug 31, 2014 1:13 am

The mr2 version is supercharged right?
Back to top Go down
View user profile
Akiyama-Wataru
Water Spiller
avatar

Posts : 62
Join date : 2014-06-29
Age : 20

PostSubject: Re: Picked up a new project :]   Sun Aug 31, 2014 1:17 am

Nothing wrong with a 16 Valve, I Have a whole list of stuff done to my motor like,
Brian Crower 1.9L Stroker kit, TRD Valve's, Blue top Big port head, Stage 2 Clutch, TRD Block, And CBR 900RR Street bike carb's






_
There's really not much to say v_v
Back to top Go down
View user profile
Obelisk
Fujiwara
avatar

Posts : 3484
Join date : 2013-06-08
Age : 21
Location : Nowhere important

PostSubject: Re: Picked up a new project :]   Sun Aug 31, 2014 4:11 pm

Can someone teach me how to read a VIN so I know what my Altima is?

_
Hamlet wrote:
Let Hercules himself do what he may, the cat will mew and dog will have his day.

Back to top Go down
View user profile
Koolaid
Touge Veteran
avatar

Posts : 1721
Join date : 2012-12-08
Age : 27
Location : Virginia Beach, VA

PostSubject: Re: Picked up a new project :]   Sun Aug 31, 2014 6:08 pm

Yeah building a 16v is way cheaper.
A friend of mine who's selling me his kouki front had built 16v but the shop fucked up and installed some shit backwards -____-
He ended up finding a BT 20v on craigslist for $900 and threw that in there.
A couple of months ago he kept egging me on to buy this 7afe off craigslist that popped up and the rest of his 16v to build a 7age but i just didn't have the money at the time nor the money to sleeve the block lol

_
Back to top Go down
View user profile
betadood
Touge Enthusiast
avatar

Posts : 652
Join date : 2012-12-09
Age : 21
Location : Texas

PostSubject: Re: Picked up a new project :]   Sun Aug 31, 2014 11:15 pm

Hope it gets up and running soon, can't wait to see what you do with it!

Obelisk wrote:
Can someone teach me how to read a VIN so I know what my Altima is?
It varies between cars but for Nissans it works like this http://nissanhelp.com/diy/common/nissan_vin.php

Edit:That should fix it.

_


B class (AE86): New Downhill: 4:33.632 New Uphill: 4:51.676
                                                      Old Downhill: 3:47.110 Old Uphill: 3:58.522
A class (22B): New Downhill: 4:27.633 New Uphill: 4:38.230
                                               Old Downhill: 3.41.310 Old Uphill: 3.54.605


Last edited by betadood on Sun Aug 31, 2014 11:18 pm; edited 2 times in total
Back to top Go down
View user profile http://forzastats.com/Player/Betadood
Obelisk
Fujiwara
avatar

Posts : 3484
Join date : 2013-06-08
Age : 21
Location : Nowhere important

PostSubject: Re: Picked up a new project :]   Sun Aug 31, 2014 11:17 pm

^Dead link on my end

_
Hamlet wrote:
Let Hercules himself do what he may, the cat will mew and dog will have his day.

Back to top Go down
View user profile
Mulchy
Mountain Pass Master
avatar

Posts : 892
Join date : 2012-12-08
Age : 22
Location : Raleigh, NC

PostSubject: Re: Picked up a new project :]   Mon Sep 01, 2014 5:53 pm

Just buy a Saab Viggen motor and call it a day. cheers

_
97' Rx-7 FD3S NDH(4:34.656) - CLEAN
Back to top Go down
View user profile
Koolaid
Touge Veteran
avatar

Posts : 1721
Join date : 2012-12-08
Age : 27
Location : Virginia Beach, VA

PostSubject: Re: Picked up a new project :]   Mon Sep 01, 2014 5:59 pm

pshh if any other motor is going in there is going to be either a 13b or an fa20 xD

_
Back to top Go down
View user profile
Mulchy
Mountain Pass Master
avatar

Posts : 892
Join date : 2012-12-08
Age : 22
Location : Raleigh, NC

PostSubject: Re: Picked up a new project :]   Mon Sep 01, 2014 6:16 pm

Bruuuuh, 250hp 250ft/lbs tq. and 20psi on a TD04 19t stock. Sorry i'm biased and it's my fav motor Very Happy

_
97' Rx-7 FD3S NDH(4:34.656) - CLEAN
Back to top Go down
View user profile
Koolaid
Touge Veteran
avatar

Posts : 1721
Join date : 2012-12-08
Age : 27
Location : Virginia Beach, VA

PostSubject: Re: Picked up a new project :]   Wed Sep 03, 2014 9:51 pm

Got my first day off in weeks and manhandled the 16v over to my friends house where my 86 is in 100 degree weather -___-
Blown 16v is out.
Still need to test the compression to see if i need to open the bitch up lol
And i also need to get the engine harness redone for the aw11 motor, a clutch, and handful of other things to get the car up and running if everything checks out.
My friend said he needed the cressida rotors and spindles back, so i gave it to him since i got the car from him for a steal.
I'll probably end up running something the same diameter or bigger up front.












_
Back to top Go down
View user profile
Obelisk
Fujiwara
avatar

Posts : 3484
Join date : 2013-06-08
Age : 21
Location : Nowhere important

PostSubject: Re: Picked up a new project :]   Wed Sep 03, 2014 9:52 pm

Jeezus, you lugged the engine to your friend's house?
How much does an engine weigh, 300+ pounds?

_
Hamlet wrote:
Let Hercules himself do what he may, the cat will mew and dog will have his day.

Back to top Go down
View user profile
Koolaid
Touge Veteran
avatar

Posts : 1721
Join date : 2012-12-08
Age : 27
Location : Virginia Beach, VA

PostSubject: Re: Picked up a new project :]   Wed Sep 03, 2014 10:43 pm

No we threw it in the back of my pops truck.
My friend lent out his hoist to someone so yeah we had to man handle it.
I mean its heavy but its nothing compared to a 3sgte motor lol

_
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Picked up a new project :]   

Back to top Go down
 
Picked up a new project :]
View previous topic View next topic Back to top 
Page 3 of 3Go to page : Previous  1, 2, 3
 Similar topics
-
» Team Project Revolution Official Thread!
» Project Reality Mod BF2
» Project: Cosplay 2.0
» I'm starting a Project R site
» 40K Ork Guy project

Permissions in this forum:You cannot reply to topics in this forum
Touge Union :: Off Topic-
Jump to: